MyBB Internal: One or more warnings occured. Please contact your administrator for assistance.
no test results / failed test
Current time: 09-19-2020, 07:23 AM Hello There, Guest! (LoginRegister)

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
no test results / failed test
04-12-2010, 01:05 AM (This post was last modified: 04-12-2010 01:15 AM by martin.wignall.)
Post: #1
no test results / failed test
Hi,
I have installed web page test on my PC running Windows XP. I have IE 7.

I can start urlBlast and it appears to be fine. I can also run your web application locally, and run a test for a particular URL to be tested.

After a few seconds, a browser will appear, but no page is loaded. After a second or two, it fails (blank browser), with "about:blank" in the URL bar.

If I look at the test results it basically tells me that everything took 0 seconds, and 0 KB were loaded. So it looks like the test failed.

If (during a test), I replace "about:blank" in the browser with the web site URL I'm trying to test, then it does navigate to that page. But the test results are as described above.

I have noticed that the plug-in CIEHook is installed in my browser. Interestingly, while this is enabled I cannot browse any websites at all from IE. The browser is rendered useless. I notice that this plug-in is written by yourself. So I have disabled the plug-in. I'm wondering if this is the cause of my problem. However, whether I disable or enable the plug in I still encounter the problems described above.

Any help on this would be gratefully appreciated!

Many thanks,
Martin
A further observation is that I notice urlBlast is looking here: http://127.0.0.1/work/.

If I try to navigate to this URL in a browser, I get "403 Forbidden: You don't have permission to access /work/ on this server." Unsure if this is expected behaviour, or a hint that I have something set up wrong.

My urlblast.ini looks like this:
==============================

[Configuration]

; Type of test (cached, uncached or both) - setting is global for all threads
; 0 = Both (clears cache, loads web page then loads it again
; 1 = uncached (clears the cache before every page)
; 2 = cached (never clears the cache)
; 4 = pagetest-only mode
Test Type=4

; Startup delay (in seconds)
Startup Delay=1

; Log file - _iewtr.txt and _iewpg.txt will be appended automatically
; %MACHINE% can be used as a placeholder for the local machine name
Log File=C:\Program Files\WebPageTest\Web Site\log\urlBlast_%MACHINE%

; Number of simultaneous browsers to run
Thread Count=1

; Test user account info. A number will be added to the end of the account for each thread
; so "user" becomes "user1", "user2", etc. If not specified the default is:
;account=user
;password=2dialit


; Location information for fetching work
; This is currently set up assuming the web server and test machine are the same
; If the we server is separate, change the url to point to the correct server
Url Files Url=http://127.0.0.1/work/
Location=Test_Ethernet
Location Key=TestKey123

; Maximum number of seconds to allow for a page load before timing out
Timeout=120

; Reboot after X minutes of running (0 = disable reboot interval)
Reboot Interval=0

; Number of days between clearing the cache for all users (including the user profiles and running a disk defrag)
; This is only checked at startup so if you never reboot this won't happen
Clear Cache Interval=30

; Exit after X complete runs through the url list 0 = don't exit
Exit runs=0

; For Server 2003 or Vista and later we have to host IE in our own exe
; on XP you can comment this out and it will use iexplore.exe
;browser=pagetest.exe
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
no test results / failed test - martin.wignall - 04-12-2010 01:05 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)